云南怒江干热河谷区咖啡绿蚧周年发生规律研究

对云南怒江干热河谷区咖啡绿蚧的调查表明:咖啡绿蚧单株虫口数量变化与平均温度的变化呈显著正相关(r=0.6984),为害率的变化与单株虫口数量的变化呈极显著正相关(r=0.7651),繁殖速度与平均温度增量呈显著正相关(r=0.6984),扩散传播速度与繁殖速度呈极显著正相关(r=0.8408),周年变化曲线呈双峰曲线。     

云南松单板类人造板材良种选育的研究

以云南松优良群体为选择基础,以优株为选择对象,在评出的优良产地内选择了石屏牛达、龙朋,双柏鄂嘉、雨龙,云龙天池、大栗树,禄丰樟木箐等天然优良林分,在林分内按优树标准开展了优良个体选择.共选择表型较好的优株205株,分株开展了多点年度间的表型测定.以3～4年生优树子代的生长量及优树的纹理通直度、木材密度,松脂含量作为选择性状,经对各性状的遗传力和权重值等进行综合选择,评选出了牛达39号、13号、28号、18号、3号,龙朋6号、5号、2号,双柏鄂嘉3号、17号,双柏雨龙12号,腾冲古永9号,贡山8号,云龙1号等32个符合单板类人造板材良种要求的优良单株.它们的树高增长率79.0%～13.3%,实际增益30.63%,遗传增益16.85%,其中有21个家系的木材密度提高了5.59%,松脂含量为对照的82.4%,树干通直度达97.6%.评选出的这些优株已进行了保存和利用.     

Severe hail damage to mangroves at Port Curtis, Australia

A hailstorm in October 1994 was found to have moderately or severely impacted on 5.3% of the mangrove forests in Port Curtis. All mangrove species showed evidence of hail damage, including the three most common species (Rhizophora stylosa, Ceriops tagal and Avicennia marina). Physical effects of hail damage included stripping of leaves from plants, holes punched through leaves, bruising to bark, divots removed from bark, branch and plant death. Speciesspecific differences in vulnerability to the effects of hail were observed with C.tagal experiencing relatively higher mortality rates than the other two common mangrove species. A delayed pattern of mortality was observed in two species _ C.tagal and A.marina. Alterations to mangrove community structure included: (1) reductions in stem density, stem diameter and basal area, (2) reductions in canopy cover (based on a photographic index of foliage projective cover) and (3) changes in relative abundance of species in mangrove zones. Recovery was observed in some stands but others had not recovered to prehail levels of canopy cover two years after the hailstorm. Recovery had occurred by regeneration of fresh leaves but no recruitment of young plants had been observed during the study. The forests in the impact area were dominated by either Ceriops tagal or Rhizophora stylosa with Avicennia marinaas a subdominant in places. C.tagal dominated forests within the impact area were relatively more severely affected (41.8% in the severe category) than R.stylosa dominated communities (only 17.4% in the severe category). This indicated that C.tagal dominated forests were more vulnerable to the effects of hail damage than R.stylosa dominated forests. In addition, hailimpacted C.tagal dominated forests represented a relatively high percentage of the area of C.tagal dominated forests in Port Curtis (44.3%). This percentage was much higher than hailimpacted R.stylosa dominated forests in Port Curtis (2.7%). These two factors – relatively severe impact on C.tagal communities and a relatively higher percentage affected within the Port Curtis area – illustrate that hailstorms, as a form of natural disturbance, are an important influence on the forest ecology of mangrove ecosystems in this region.     

Growing situation of afforested trees and damage to lower-story trees caused by felling in multi-storied forest management in Peninsular Malaysia

The growing condition of afforestation trees and damage to lower-story trees caused by felling and hauling of upper-story trees in a multi-storied forest in Peninsular Malaysia was surveyed. Seventy months have passed since the planting ofAcacia mangium upperstory trees, which have grown 233 m³/ha in volume. The growth ofShorea leprosula thirty-five months after planting of lower-story trees have reached 5.54 m in height. However, as the ratio of height to basal diameter exceeds 100:1, trees are tapering to a considerable degree. A backhoe was installed in order to fell the upper-story trees. From the results of logging, the damage ratio estimation of the lower-story trees was simulated by using the Monte Carlo method. The damage ratio differed considerably depending on planting patterns, height of upper-story trees and felling skills. The results of this survey proved that the felling and hauling of upper-story trees would be technically feasible in the future, except when one row upper-story trees and one row lower-story trees method were employed.     

FRW阻燃胶合板的DMA分析

目前世界范围内木材资源短缺的情况日益加剧,发展人造板工业已成为世界各国解决木材资源严重不足的重要途径.其中,胶合板作为室内装饰的主要材料,其产量和需求量都在急剧增长.我国胶合板产量从1980年的33.00万m3增长到2004年的2 098.62万m3,呈现大幅度增长的趋势(张文标等,2000).但由于普通胶合板具有易燃性,在许多领域的应用上受到限制.因为一旦发生火灾,不仅造成重大的经济损失,而且往往会发生人员伤亡.1950-2003年全国共发生火灾4 177 730起,直接经济损失2 434.525 1亿元,因火灾死亡174 855人,受伤329 352人.     

不同立地条件香椿人工林木材材质的比较

通过对不同立地条件下香椿人工林木材物理力学性质的测定和比较分析表明:香椿人工林木材密度和干缩性随着立地级的提高而减小;木材顺纹抗压强度、抗弯强度和硬度:Ⅰ级地<Ⅱ级地<Ⅲ级地,抗弯弹性模量、抗劈力、冲击韧性:Ⅱ级地>Ⅰ级地>Ⅲ级地,顺纹抗剪强度:Ⅱ级地>Ⅲ级地>Ⅰ级地。差异显著性t检验表明:香椿人工林木材密度Ⅰ级地、Ⅱ级地、Ⅲ级地间差异不显著。香椿人工林木材干缩性和力学性质指标Ⅰ级、Ⅱ级、Ⅲ级地3者间有的指标差异极显著,有的指标差异显著,大部分指标差异不显著。     

A review of the effect of stresses between lifting and planting on nursery stock quality and performance

This paper presents the experimental evidence on the effects of desiccation, low and high temperatures, rough handling, root loss and storage between lifting and planting on plant quality and performance. The review concentrates on the impact of these stresses on outplanting performance; their effect on seedling properties, such as root growth potential and root electrolyte leakage, is also described. Stresses most often happen in combination but there is relatively little information on their interactions. Examples of desiccation plus rough handling, cold storage plus desiccation, frost damage plus freeze storage and the triple stress of desiccation, heating and rough handling are presented. The limited evidence on the cumulative effect of stresses suggests tentatively that damage from rough handling does not accumulate in the same way as damage from desiccation and prolonged storage. Factors affecting stress resistance are briefly reviewed.There are three impediments to producing a critical review of the literature: experimental treatments, particularly of desiccation and rough handling, can rarely be directly compared; the impact of stress treatments can be modified by a large number of factors, and the levels of stress have seldom been quantified in normal forestry practice. The first two problems also make it difficult to formulate general statements concerning critical thresholds for the stresses. However, instruments are now available for measuring and monitoring stresses between lifting and planting and it is, in theory, possible to model the effects of these stresses to take account of the many factors that modify their impact on seedling survival and growth. This offers the possibility of significant improvements in our ability to predict the effect of stresses between lifting and planting on seedling performance.     

The effect of compression and incision on wood veneer and plywood physical and mechanical properties

ABSTRACT

Drying takes the largest share of energy in plywood production, and varying moisture content of veneers necessitates re-drying that often leads to over-dry veneers with deactivated surfaces, which may promote imperfect bonding. In order to decrease the drying time, reduce the need for re-drying of veneers, and improve the quality of plywood, birch and spruce veneers were subjected to pre-treatment by cold compression, incision, or a combination of the two. The effects of pre-treatment on the veneer and plywood quality were assessed by standard tests. Compression had a beneficial effect on water removal of the wettest veneers (spruce sapwood (SW) and birch), but some thickness reduction was observed in the veneers as well as the finished birch plywood. Compression led to thickness reduction of spruce veneers, but had no effect on SW plywood thickness likely due to higher viscoelasticity. Both compression and the combination of incising and compression levelled the moisture variation within the compressed stacks. Incision improved the modulus of elasticity of birch plywood, shear strength of SW plywood, and both bending and shear strengths of heartwood plywood. Higher surface pressure decreased the drying time of spruce SW in both plain compression and combined incision and compression pre-treatment.     

南方铁杉与长苞铁杉物理力学性质研究

本文对产于福建省武夷山市的南方铁杉和连城县的长苞铁杉进行了较系统的材性试验研究,提供了必要的该铁杉属木材的物理力学性质指标。     

提高减速箱中橡胶油封-金属转轴密封性能的方法

减速箱橡胶油封漏油是一个尚未解决的一个棘手问题 .从摩擦学的角度分析 ,漏油的原因主要是油封与转轴接触部位不符合摩擦学的要求 ,造成此处的摩擦系数过高 ,油封磨损过快 .介绍了几种降低橡胶油封与转轴之间摩擦系数的方法